Commit 3330b46d authored by jbrossar's avatar jbrossar
Browse files

[DOC] Correct come english mistakes

parent 17768de6
Pipeline #8478 passed with stage
in 33 minutes and 30 seconds
......@@ -236,7 +236,7 @@ namespace vns
m_AOTCompositeFilter->SetFontFileName(m_FontFileName);
//--------------------------------------------------------------
// Launch treatment
// Launch processing
m_AOTCompositeFilter->UpdateData();
//--------------------------------------------------------------
......@@ -261,7 +261,7 @@ namespace vns
m_VAPCompositeFilter->SetFontSize(m_FontSize);
m_VAPCompositeFilter->SetFontFileName(m_FontFileName);
// Launch treatment
// Launch processing
m_VAPCompositeFilter->UpdateData();
//create noData pixel and noDataReplaceValue(variableLengthVector)
......@@ -303,7 +303,7 @@ namespace vns
m_SRECompositeFilter->SetFontFileName(m_FontFileName);
//--------------------------------------------------------------
// Launch treatment
// Launch processing
m_SRECompositeFilter->UpdateData();
//--------------------------------------------------------------
......@@ -340,7 +340,7 @@ namespace vns
m_FRECompositeFilter->SetFontFileName(m_FontFileName);
//--------------------------------------------------------------
// Launch treatment
// Launch processing
m_FRECompositeFilter->UpdateData();
}
// No FRE band
......
......@@ -321,7 +321,7 @@ namespace vns
// In init mode, the reflectance variation threshold test is not performed
// and the water mask of the composite is not available
// A constant mask is generate to proceed the treatments
// A constant mask is generate to proceed the processings
// This mask is also used when an option is not set and a simulated image has to be used
m_ConstantMaskFilter->SetSize(l_IPEDGPtr->GetLargestPossibleRegion().GetSize());
m_ConstantMaskFilter->SetSpacing(l_IPEDGPtr->GetSpacing());
......
......@@ -401,7 +401,7 @@ private:
}
// In init mode, the reflectance variation threshold test is not performed
// and the water mask of the composite is not available
// A constant mask is generate to proceed the treatments
// A constant mask is generate to proceed the processings
// This mask is also used when an option is not set and a simulated image has to be used
m_ConstantMaskFilter->SetSize(l_IPEDGPtr->GetLargestPossibleRegion().GetSize());
m_ConstantMaskFilter->SetSignedSpacing(l_IPEDGPtr->GetSignedSpacing());
......
......@@ -468,7 +468,7 @@ private:
vnsLogWarningMacro("Can not run without altitude in InitMode, constant mask produced");
// In init mode, the reflectance variation threshold test is not performed
// and the water mask of the composite is not available
// A constant mask is generate to proceed the treatments
// A constant mask is generate to proceed the processings
// This mask is also used when an option is not set and a simulated image has to be used
m_ConstantMaskFilter->SetSize(l_IPEDGPtr->GetLargestPossibleRegion().GetSize());
m_ConstantMaskFilter->SetSignedSpacing(l_IPEDGPtr->GetSignedSpacing());
......
......@@ -166,7 +166,7 @@ namespace vns
m_Mutex.Lock();
// --------------------------------------
// Queue treatment
// Queue processing
while (!m_OperationQ.empty())
{
switch (m_OperationQ.front())
......@@ -193,14 +193,14 @@ namespace vns
break;
// --------------------------------------
// Write treatment
// Write processing
case ThreadLogger::WRITE:
Logger::Write(m_LevelQ.front(), m_MessageQ.front());
m_LevelQ.pop();
m_MessageQ.pop();
break;
// --------------------------------------
// Flush treatment
// Flush processing
case ThreadLogger::FLUSH:
Logger::Flush();
break;
......@@ -276,7 +276,7 @@ namespace vns
pLogger->m_Mutex.Lock();
// --------------------------------------
// Queue treatment
// Queue processing
while (!pLogger->m_OperationQ.empty())
{
switch (pLogger->m_OperationQ.front())
......
......@@ -1782,7 +1782,7 @@ Processing description:
The maja launches the following processes:
- launches the pre-processing treatment
- launches the pre-processing step
\* Uncompresses all data (DBL package files and BZ2 images files)
......@@ -1792,7 +1792,7 @@ The maja launches the following processes:
\* Applies a specific stylesheet on GIPPs files
- launches the scientific-processing treatment
- launches the scientific-processing step
\* Reads image products
......@@ -1800,11 +1800,11 @@ The maja launches the following processes:
\* Formats EE and writes datas
- launches the checktool-processing treatment
- launches the checktool-processing step
\* Compute checktool on the outputs images products
- launches the post-processing treatment
- launches the post-processing step
\* Check output data with the schemas
......@@ -4351,7 +4351,7 @@ Processing description:
The maja launches the following processes:
- launches the pre-processing treatment
- launches the pre-processing step
\* Uncompresses all data (DBL package files and BZ2 images files)
......@@ -4361,7 +4361,7 @@ The maja launches the following processes:
\* Applies a specific stylesheet on GIPPs files
- launches the scientific-processing treatment
- launches the scientific-processing step
\* Reads image products
......@@ -4369,11 +4369,11 @@ The maja launches the following processes:
\* Formats EE and writes datas
- launches the checktool-processing treatment
- launches the checktool-processing step
\* Compute checktool on the outputs images products
- launches the post-processing treatment
- launches the post-processing step
\* Check output data with the schemas
......
......@@ -1788,7 +1788,7 @@ Processing description:
The maja launches the following processes:
- launches the pre-processing treatment
- launches the pre-processing step
\* Uncompresses all data (DBL package files and BZ2 images files)
......@@ -1798,7 +1798,7 @@ The maja launches the following processes:
\* Applies a specific stylesheet on GIPPs files
- launches the scientific-processing treatment
- launches the scientific-processing step
\* Reads image products
......@@ -1806,11 +1806,11 @@ The maja launches the following processes:
\* Formats EE and writes datas
- launches the checktool-processing treatment
- launches the checktool-processing step
\* Compute checktool on the outputs images products
- launches the post-processing treatment
- launches the post-processing step
\* Check output data with the schemas
......@@ -4363,7 +4363,7 @@ Processing description:
The maja launches the following processes:
- launches the pre-processing treatment
- launches the pre-processing step
\* Uncompresses all data (DBL package files and BZ2 images files)
......@@ -4373,7 +4373,7 @@ The maja launches the following processes:
\* Applies a specific stylesheet on GIPPs files
- launches the scientific-processing treatment
- launches the scientific-processing step
\* Reads image products
......@@ -4381,11 +4381,11 @@ The maja launches the following processes:
\* Formats EE and writes datas
- launches the checktool-processing treatment
- launches the checktool-processing step
\* Compute checktool on the outputs images products
- launches the post-processing treatment
- launches the post-processing step
\* Check output data with the schemas
......
......@@ -1782,7 +1782,7 @@ Processing description:
The maja launches the following processes:
- launches the pre-processing treatment
- launches the pre-processing step
\* Uncompresses all data (DBL package files and BZ2 images files)
......@@ -1792,7 +1792,7 @@ The maja launches the following processes:
\* Applies a specific stylesheet on GIPPs files
- launches the scientific-processing treatment
- launches the scientific-processing step
\* Reads image products
......@@ -1800,11 +1800,11 @@ The maja launches the following processes:
\* Formats EE and writes datas
- launches the checktool-processing treatment
- launches the checktool-processing step
\* Compute checktool on the outputs images products
- launches the post-processing treatment
- launches the post-processing step
\* Check output data with the schemas
......@@ -4351,7 +4351,7 @@ Processing description:
The maja launches the following processes:
- launches the pre-processing treatment
- launches the pre-processing step
\* Uncompresses all data (DBL package files and BZ2 images files)
......@@ -4361,7 +4361,7 @@ The maja launches the following processes:
\* Applies a specific stylesheet on GIPPs files
- launches the scientific-processing treatment
- launches the scientific-processing step
\* Reads image products
......@@ -4369,11 +4369,11 @@ The maja launches the following processes:
\* Formats EE and writes datas
- launches the checktool-processing treatment
- launches the checktool-processing step
\* Compute checktool on the outputs images products
- launches the post-processing treatment
- launches the post-processing step
\* Check output data with the schemas
......
......@@ -558,7 +558,7 @@ helper lines
The maja launches the following processes:
- launches the pre-processing treatment
- launches the pre-processing step
* Uncompresses all data (DBL package files and BZ2 images files)
......@@ -568,7 +568,7 @@ helper lines
* Applies a specific stylesheet on GIPPs files
- launches the scientific-processing treatment
- launches the scientific-processing step
* Reads image products
......@@ -576,7 +576,7 @@ helper lines
* Formats EE and writes datas
- launches the post-processing treatment
- launches the post-processing step
* Check output data with the schemas
......
......@@ -147,12 +147,12 @@ namespace vns
double inv_factor(0.);
if (fnum >= fdenom)
{
vnsLogDebugMacro("ResamplerBuilder: It's an 'OVER' sampling treatments (num='" << fnum << "' and denom='" << fdenom << "')")
vnsLogDebugMacro("ResamplerBuilder: It's an 'OVER' sampling processings (num='" << fnum << "' and denom='" << fdenom << "')")
inv_factor = 1.;
}
else
{
vnsLogDebugMacro("ResamplerBuilder: It's a 'SUB' sampling treatments (num='" << fnum << "' and denom='" << fdenom << "')")
vnsLogDebugMacro("ResamplerBuilder: It's a 'SUB' sampling processings (num='" << fnum << "' and denom='" << fdenom << "')")
inv_factor = static_cast<double>(fdenom) / static_cast<double>(fnum);
}
//------------------------------------------------------------------
......
......@@ -199,30 +199,30 @@ class AppHandler:
Processing description:\n
-----------------------\n
The maja launches the following processes:\n
- launches the pre-processing treatment\n
- launches the pre-processing step\n
* Uncompresses all data (DBL package files and BZ2 images files)\n
* Check input data with the schemas\n
* Deletes all tarballs (if option is enable in the Configuration file)\n
* Applies a specific stylesheet on GIPPs files\n
- launches the scientific-processing treatment\n
- launches the scientific-processing step\n
* Reads image products\n
* Applies algorithms\n
* Formats EE and writes datas\n
- launches the post-processing treatment\n
- launches the post-processing step\n
* Check output data with the schemas\n
* Compress BZ2 all .TIF images data files\n
* Generates the .DBL image product data (L2/L3)\n\n
For more details, report to the SUM (Software User Manual, ref. LAIG-MU-MAC-010-CS)\n\n
Author: CS Systemes d'Information (France)\n\n
User cases:\n
Use cases:\n
-----------\n
1. First user case: Use only a JobOrder file to launch maja processing. \n
1. First use case: Use only a JobOrder file to launch maja processing. \n
-> use the '--jobOrder' option.\n
Note: the possible values for the <Processor_Name> field are:\n
* m_MAJA_L2_INIT_CHAIN \n
* m_MAJA_L2_NOMINAL_CHAIN \n
* m_MAJA_L2_BACKWARD_CHAIN \n
2. Second user case: Use command line parameters to launch maja processing\n
2. Second use case: Use command line parameters to launch maja processing\n
-> for example, use at least the '--mode' and '--input' options\n\n
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment